Please register and login in order to share patches.

Genghis Khan Ld by Fer_Svengali

Oscillator 1 timbre

Only sawtooth oscillators are enabled, resulting in a harmonically rich content.

Oscillator 2 timbre

Volume level for oscillator 2 is set to 0 and is modulated by Foot Ctrl.

Foot Ctrl mod-matrix 7 modulation amount for volume level for oscillator 2 is 75.

Tone for oscillator 2 is manually set to 75.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by Note Num, VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 64.

Noise timbre

Noise level is set to 32 and is modulated by Mod Wheel.

Mod Wheel mod-matrix 2 modulation amount for Noise level is 4.

Oscillator 2 FM timbre

experimental

Oscillator 2 pitch is modulated by Mod Wheel, Foot Ctrl, LFO 2.

LFO 2 direct modulation amount for oscillator 2 pitch is 11.

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 111.15Hz (34) and is modulated by Mod Wheel, Foot Ctrl, Note Num, LFO 2, VCF Env.

Mod Wheel mod-matrix 5 modulation amount for low-pass filter cut-off frequency is -15.

LFO 2 direct modulation amount for low-pass filter cut-off frequency is 91.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 102.

Low-pass filter envelope amount is modulated by Note Num, Foot Ctrl.

Note Num direct modulation amount for low-pass filter envelope amount is 102.

Foot Ctrl mod-matrix 1 modulation amount for low-pass filter envelope amount is 24.

Filter resonance is set to 20 and is modulated by Pressure.

Pressure mod-matrix 4 modulation amount for filter resonance is 40.

Oscillator drift & unison detuning timbre

Unison detune level is manually set to ±10 cents (51).

Oscillators drift level is off.

Performance triggering timbre

Envelope triggering mode is set to mono.

Oscillators are reset on keyboard presses.

Oscillator 1 pitch pitch

Oscillator 1 pitch is modulated by LFO 1.

LFO 1 direct modulation amount for oscillator 1 pitch is 11.

Oscillator 2 pitch pitch

Oscillator 2 pitch is set to -12 semitones and is modulated by Mod Wheel, Foot Ctrl, LFO 2.

LFO 2 direct modulation amount for oscillator 2 pitch is 11.

Portamento pitch

Portamento time is manually set to 20.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is manually set to 100. Effect 2 level is manually set to 33. Effect 3 level is manually set to 100. Effect 4 level is manually set to 15.

Flanger fx

not yet complete

Flange & Reverb fx

not yet complete

4-Tap Delay fx

not yet complete

Mood Filter fx

not yet complete

Mod Wheel modulator

Controls OSC 1 Mod Wheel > Pitch Mod Depth, OSC 2 Mod Wheel > Pitch Mod Depth, Noise Level, VCF Cut-off Frequency, LFO 2 Rate, OSC 2 Pitch.

function	type	destination	amount
pitch	menu	OSC 1 Mod Wheel > Pitch Mod Depth	40
pitch	menu	OSC 2 Mod Wheel > Pitch Mod Depth	20
timbre	matrix	Noise Level	4
timbre	matrix	VCF Cut-off Frequency	-15
	matrix	LFO 2 Rate	72
pitch	fader-indirect	OSC 2 Pitch	11
timbre	fader-indirect	VCF Cut-off Frequency	91

Foot Ctrl modulator

Controls VCF LFO, OSC 2 Pitch, VCF Cut-off Frequency, OSC 2 Level.

function	type	destination	amount
timbre	matrix	VCF LFO	24
pitch	fader-indirect	OSC 2 Pitch	11
timbre	fader-indirect	VCF Cut-off Frequency	91
timbre	matrix	OSC 2 Level	75

Pressure modulator

Controls OSC 1 Aftertouch > Pitch Mod Depth, VCF Resonance.

function	type	destination	amount
pitch	menu	OSC 1 Aftertouch > Pitch Mod Depth	72
timbre	matrix	VCF Resonance	40

Note Num modulator

Controls VCF Keyboard Tracking, All Attack Times, VCA Gain for All Voices, VCF Cut-off Frequency.

function	type	destination	amount
timbre	fader	VCF Keyboard Tracking	102
timbre,volume,pitch	matrix	All Attack Times	-24
volume	menu-indirect	VCA Gain for All Voices	255
timbre	fader-indirect	VCF Cut-off Frequency	102

Note Vel modulator

Controls VCA Envelope Velocity Sensitivity.

function	type	destination	amount
	menu	VCA Envelope Velocity Sensitivity	38

LFO 1 modulator

Controls OSC 1 Pitch.

function	type	destination	amount
pitch	fader	OSC 1 Pitch	11

name	value
LFO 1 Rate	5.13Hz (167)
LFO 1 Delay / Fade	2.53s (98)
LFO 1 Shape	Triangle
LFO 1 Key Sync	off
LFO 1 Arp Sync	off
LFO 1 Mono Mode	0
LFO 1 Slew Rate	0

LFO 2 modulator

Controls OSC 2 Pitch, VCF Cut-off Frequency.

function	type	destination	amount
pitch	fader	OSC 2 Pitch	11
timbre	fader	VCF Cut-off Frequency	91

name	value
LFO 2 Rate	0.37Hz (76)
LFO 2 Delay / Fade	1.09s (42)
LFO 2 Shape	Triangle
LFO 2 Key Sync	off
LFO 2 Arp Sync	off
LFO 2 Mono Mode	1
LFO 2 Slew Rate	32

VCA Env modulator

Controls VCA Gain for All Voices.

function	type	destination	amount
volume	menu	VCA Gain for All Voices	255

name	value
VCA Envelope Attack Time	1s (119)
VCA Envelope Decay Time	12.43s (200)
VCA Envelope Sustain Level	100% (255)
VCA Envelope Release Time	0.5s (85)
VCA Envelope Trigger Mode	Key (0)
VCA Envelope Attack Curve	50
VCA Envelope Decay Curve	0
VCA Envelope Sustain Curve	128
VCA Envelope Attack Curve	42

VCF Env modulator

Controls VCF Cut-off Frequency.

function	type	destination	amount
timbre	fader	VCF Cut-off Frequency	102

name	value
VCF Envelope Attack Time	0.5s (85)
VCF Envelope Decay Time	32s (255)
VCF Envelope Sustain Level	40% (102)
VCF Envelope Release Time	0.62s (93)
VCF Envelope Trigger Mode	Key (0)
VCF Envelope Attack Curve	55
VCF Envelope Decay Curve	0
VCF Envelope Sustain Curve	128
VCF Envelope Attack Curve	33